Our Hydraulic stone splitting machine is suitable for splitting all types of natural and artificial stones, cube stone/curb stone/wall stone/blockstone/tiles/pavingstone/countertops/vanity tops.
It has floating teeth up and down, we also called it individual chisels which can make Hydraulic stone splitting machine tch the natural surface of the stones perfectly.

Conveyer Systems can be situated at the front or back of the splitting machine to facilitate the movement of irregular and heavy stones. Thanks to this application it's possible to have a continued input of semi manufactured products, which will give an increase of work productivity.

Our hydraulic stone splitter is suitable for splitting all types of natural and artificial stone, cube/curb/wall/block/tile/paving/countertop/dressing.
It has teeth that float up and down, and we also call it a separate chisel, which allows the hydraulic stone splitter to perfectly cut the natural surface of the stone.
Each slitter can be integrated into a production line, specially designed according to your needs.

The main features of our machines are:

1. The electrical control cabinet adopts French Schneider, and the internal layout is reasonable and tidy. Through the induction switch, it is convenient to send out signals quickly, so that the machine moves coherently and accurately.
2. The hydraulic system adopts German Bosch Rexroth to provide continuous, stable and sufficient power supply to the machine.
3. The intelligent gear cutting head is adopted, which can be adjusted according to the surface finish of the stone.
4. We can design wonderful stone cutting lines from blocks to paving stones, wall stones, mosaics, pebbles, etc. according to customers' needs

Hydraulic system maintenance
a. There is a filter (DC24V) alarm device in the system. When the alarm clock (4) sounds,
SP connection. It's time to clean or replace the filter element. see
Schematic diagram of hydraulic station installation.
b. N46 or ISO-VG46 anti-wear hydraulic oil is strongly recommended. this
The replacement cycle is 6 months. Open the air cleaner cover (see page 4) and use the
Filter car. Filtration precision is 10m. The maximum oil injection quantity is the upper limit
Oil level gauge.
c. failure
Please pay more attention to the rotation of the hydraulic pump after maintenance. on the contrary
The rotation of the hydraulic pump can damage the pump. The correct direction of rotation is marked
at the end of the motor. (If viewed from the rear, the direction of rotation is clockwise
motor end)
d. Fault and reason:
Cause and solution
No pressure
Pressure gauges and pumps
It's noisy.
1. Check the rotation of the motor. correct reverse
Spin now.
2. Check whether there is enough oil in the fuel tank.
3. Check the electrical signals on the valves YA1 and YA2
Cannot start Check that all lights are normal.
Misoperation of hydropower
cylinder
Check whether the solenoid valve has a signal
close to the switch.